@article {12341,
	title = {Bond characteristics of CFRP-to-steel joints},
	journal = {Journal of Constructional Steel Research},
	volume = {138},
	year = {2017},
	note = {n/a},
	pages = {401-419},
	chapter = {401},
	abstract = {<p>Carbon Fiber Reinforced Polymer (CFRP) composites have a large potential for strengthening and retrofitting steel parts but due to their premature debonding from steel, further data and research are still required for wider application in such situations. In the present paper, the bond characteristics of CFRP-to-steel joints in pull-pull loaded conditions were studied. Monotonic loading of the double strap joints with different bond lengths was applied and the failure modes and interfacial bond-slip curves were obtained. A tri-linear bondslip model is proposed and it was derived from the experimental data. A closed-form solution approach is also proposed based on the tri-linear bond-slip model. The strength of the CFRP-to-steel interface, the distribution of the relative displacements between bonded materials, the strains developed in the CFRP laminate and the bond stresses along the interface are reported and the closed-form solution is compared with the experimental results. Two cases are selected for presentation: (i) one with the bond length greater than the effective bond length; and, inversely, (ii) one with bond length which is shorter than the effective bond length. The results predicted by the closed-form solutions are shown to be accurate enough when compared to the experiments.</p>
},
	keywords = {Bond, Bond-slip curve, CFRP-to-steel joint, Closed-form solutions, Pull-pull tests},
	isbn = {0143974X},
	author = {Yang, Yongming and Biscaia, Hugo and Chastre, Carlos and Silva, Manuel A. G.}
}
