Ana Rita C. Duarte

The application of green chemistry principles in the processing of materials for advanced technologies is a steadily increasing field of research. In this work porous chitin-based materials were developed by combining the processing of chitin using ionic liquids (ILs) as a green solvent together with the use of supercritical fluid technology (SCF) as clean technology. Chitin was dissolved in 1-butyl-3-imidazolium acetate, followed by regeneration of the polymer in ethanol in specific moulds. The IL was removed using Soxhlet extraction and successive steps of extraction with SCF using carbon dioxide/ethanol ratios of 50/50 and 70/30. The developed porous chitin-based structures (ChIL) can be classified as mesoporous materials, with very low density and high porosity. The cytotoxicity of ChIL extracts was investigated using L929 fibroblast-like cells, and the results demonstrated that the produced materials have extremely low cytotoxicity levels. Therefore, the findings suggest that the porous chitin structures may be potential candidates for a number of biomedical applications, including tissue engineering. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Supercritical carbon dioxide has been used as a green solvent due to their well-known potential in biomaterials impregnation. The versatility of this technique enables the loading of implants with Active Pharmaceutical Ingredients which present several benefits when compared with traditional techniques to impregnate active compounds. In this review, we have summarized the recent progresses achieved in supercritical CO2assisted impregnation of active compounds and therapeutic deep eutectic systems for biomedical applications.

© 2017 American Chemical Society. Recent findings have reported the reason why some living beings are able to withstand the huge thermal amplitudes between winter and summer in their natural habitats. They are able to produce metabolites decreasing deeply the crystallization temperature of water, avoiding cell disrupture due to the presence of ice crystals and overcoming osmotic effects. In vitro, the possibility to cool living cells and tissues to cryogenic temperatures in the absence of ice can be achieved through a vitrification process. Vitrification has been suggested as an alternative approach to cryopreservation and could hereafter follow an interesting biomimetic perspective. The metabolites produced by these animals are mostly sugars, organic acids, choline derivatives, or urea. When combined at a particular composition, these compounds form a new liquid phase which has been defined as Natural Deep Eutectic Solvents (NADES). In this review, we relate the findings of different areas of knowledge from evolutive biology, cryobiology, and thermodynamics and give a perspective to the potential of NADES in the development of new cryoprotective agents.

In the tissue engineering (TE) field, the concept of producing multifunctional scaffolds, capable not only of acting as templates for cell transplantation but also of delivering bioactive agents in a controlled manner, is an emerging strategy aimed to enhance tissue regeneration. In this work, a complex hybrid release system consisting in a three-dimensional (3D) structure based on poly(d,l-lactic acid) (PDLLA) impregnated with chitosan/chondroitin sulfate nanoparticles (NPs) was developed. The scaffolds were prepared by supercritical fluid foaming at 200 bar and 35 °C, and were then characterized by scanning electron microscopy (SEM) and micro-CT. SEM also allowed to assess the distribution of the NPs within the structure, showing that the particles could be found in different areas of the scaffold, indicating a homogeneous distribution within the 3D structure. Water uptake and weight loss measurements were also carried out and the results obtained demonstrated that weight loss was not significantly enhanced although the entrapment of the NPs in the 3D structure clearly enhances the swelling of the structure. Moreover, the hybrid porous biomaterial displayed adequate mechanical properties for cell adhesion and support. The possibility of using this scaffold as a multifunctional material was further evaluated by the incorporation of a model protein, bovine serum albumin (BSA), either directly into the PDLLA foam or in the NPs that were eventually included in the scaffold. The obtained results show that it is possible to achieve different release kinetics, suggesting that this system is a promising candidate for dual protein delivery system for TE applications. © 2010 Elsevier B.V.

© 2016 WILEY-VCH Verlag GmbH {&} Co. KGaA, Weinheim. This work presents a novel route toward porous scaffolds for tissue engineering and regenerative medicine (TERM) applications. Hybrid cryogels with gelatin, gellan gum, carboxymethylcellulose, and lignin were prepared by a two-step process. Textural properties of the cryogels were analyzed by SEM and micro-computed tomography. The results indicated that rapid freezing retained sample shape and yielded macroporous materials. The mechanical properties of the cryogels were characterized in compression mode. Cytotoxicity studies indicated that the hybrid-alginate cryogels did not present cytotoxicity and have the potential to be used in TERM.

© 2016 IOP Publishing Ltd. In this work, we focused on the potential of bioceramics from different marine sponges - namely Petrosia ficiformis, Agelas oroides and Chondrosia reniformis - for novel biomedical/industrial applications. The bioceramics from these sponges were obtained after calcination at 750 °C for 6 h in a furnace. The morphological characteristics were evaluated by scanning electron microscopy (SEM). The in vitro bioactivity of the bioceramics was evaluated in simulated body fluid (SBF) after 14 and 21 d. Observation of the bioceramics by SEM after immersion in SBF solution, coupled with spectroscopic elemental analysis (EDS), showed that the surface morphology was consistent with a calcium-phosphate (Ca/P) coating, similar to hydroxyapatite crystals (HA). Evaluation of the characteristic peaks of Ca/P crystals by Fourier transform infrared spectroscopy and x-ray diffraction further confirmed the existence of HA. Cytotoxicity studies were carried out with the different ceramics and these were compared with a commercially available Bioglass ® . In vitro tests demonstrated that marine bioceramics from these sponges are non-cytotoxic and have the potential to be used as substitutes for synthetic Bioglass ® .

© 2017 Springer-Verlag GmbH Germany, part of Springer Nature Purpose: To perform an in vivo assessment of a newly developed biodegradable ureteral stent (BUS) produced with natural-based polymers. Methods: The BUS is based on a patented technology combining the injection process with the use of supercritical fluid technology. Study was conducted at ICVS—University of Minho (Braga, Portugal) and a total of ten domestic pigs were used. In seven animals, the experimental BUS stent was inserted, whereas in the remaining a commercially available stent was used (6-Fr Biosoft ® duo stents, Porges Coloplast, Denmark). Post-stenting intravenous pyelogram was used to evaluate the degree of hydronephrosis. The in vivo stent degradation was measured as function of the weight loss. Moreover, the tensile properties of the BUS were tested during in vivo degradation. After maximum 10 days, animals were killed and necropsy was performed. Tissues were compared between the stented groups as well as between the non-stented contralateral ureters and stented ureters in each group. Biocompatibility was assessed by histopathological grading. Results: In all cases, the BUS was only visible during the first 24 h on X-ray, and in all cases the BUS was completely degraded in urine after 10 days, as confirmed on necropsy. During the degradation process, the mechanical properties of the BUS decreased, while the commercial ureteral stents remained constant. At all time-points after stent insertion, the level of hydronephrosis was minimal. Overall, animals stented with BUS had an average grade of hydronephrosis which was lower compared to the controls. The BUS showed better pathological conditions, and hence better biocompatibility when compared with commercial stents. Conclusions: Notwithstanding the limitations of the present study, the in vivo testing of our novel natural origin polymer-based BUS suggests this device to feature homogeneous degradation, good urine drainage, and high biocompatibility. Next steps will be to increase its stability, and to improve the radiopacity without compromising its degradation. Ultimately, clinical studies will be required to determine the safety and feasibility of its use in humans.

© 2017 American Pharmacists Association® A drug-eluting biodegradable ureteral stent (BUS) has been developed as a new approach for the treatment of urothelial tumors of upper urinary tract cancer. In a previous work, this system has proven to be a good carrier for anticancer drugs as a potential effective and sustainable intravesical drug delivery system. BUS has revealed to reduce in 75{%} the viability of human urothelial cancer cells (T24) after 72 h of contact and demonstrated minimal cytotoxic effect on human umbilical vein endothelial cells (HUVECs) which were used as a control. In this work, we studied the permeability of the anticancer drugs, such as paclitaxel and doxorubicin, alone or released from the BUS developed. We used 3 different membranes to study the permeability: polyethersulfone (PES) membrane, HUVECs cell monolayer, and an ex vivo porcine ureter. The ureter thickness was measured (864.51 $μ$m) and histological analysis was performed to confirm the integrity of urothelium. Permeability profiles were measured during 8 h for paclitaxel and doxorubicin. The drugs per se have shown to have a different profile and as expected, increasing the complexity of the membrane to be permeated, the permeability decreased, with the PES being more permeable and the ex vivo ureter tissue being less permeable. The molecular weight has also shown to influence the permeability of each drug and a higher percentage for doxorubicin (26{%}) and lower for paclitaxel (18{%}) was observed across the ex vivo ureter. The permeability (P), diffusion (D), and partition (K d ) coefficients of paclitaxel and doxorubicin through the permeable membranes were calculated. Finally, we showed that paclitaxel and doxorubicin drugs released from the BUS were able to remain in the ex vivo ureter and only a small amount of the drugs can across the different permeable membranes with a permeability of 3{%} for paclitaxel and 11{%} for doxorubicin. The estimated amount of paclitaxel that remains in the ex vivo ureter tissue is shown to be effective to affect the cancer cell and not affect the noncancer cells.

In this work, the ability to foam semi-crystalline natural-based polymers by supercritical fluid technology is evaluated. The application of this technique to natural polymers has been limited due to the fact that they are normally semi-crystalline polymers, which do not plasticize in the presence of carbon dioxide. This can be overcome by the use of plasticizers, such as glycerol, which is a commonly used plasticizer, or ionic liquids, which have recently been proposed as plasticizing agents for different polymers. Following the green chemistry principles, the main aim is, hereafter, the design and development of new 3D architectures of natural-based polymers, combining ionic liquids (IL) and supercritical fluid (SCF) technology. A polymeric blend of starch, one of the most abundantly occurring natural polymers, and poly-$ε$-caprolactone, a synthetic polymer, which is a biodegradable aliphatic polyester commonly used in an array of biomedical applications (SPCL), was processed by supercritical fluid foaming, at different operating conditions, namely pressure (10.0 up to 20.0 MPa), temperature (35 up to 60 °C) and soaking time (30 min up to 3 h). The ionic liquid tested in this work was 1-butyl-3-methylimidazolium acetate ([bmim]Ac). The interactions between SPCL and [bmim] Ac or glycerol were analysed by Fourier transform infrared spectroscopy, differential scanning calorimetry and by mechanical tests, using both tensile and compressive modes. Morphological analysis, porosity, interconnectivity and pore size distribution of the matrixes were evaluated and the morphology was analyzed by scanning electron microscopy and by micro-computed tomography. To our knowledge the use of ionic liquids as foaming agents is reported here for the first time. The results obtained suggest that this approach can further promote the development of composite polymer-IL materials, particularly for catalysis, chromatography, extraction and separation purposes. © The Royal Society of Chemistry 2012.

© 2015 Elsevier B.V. Ureteral stents are indispensable tools in urologic practice. The main complications associated with ureteral stents are dislocation, infection, pain and encrustation. Biodegradable ureteral stents are one of the most attractive designs with the potential to eliminate several complications associated with the stenting procedure. In this work we hypothesize the impregnation of ketoprofen, by CO 2 -impregnation in a patented biodegradable ureteral stent previously developed in our group. The biodegradable ureteral stents with each formulation: alginate-based, gellan gum-based were impregnated with ketoprofen and the impregnation conditions tested were 100 bar, 2 h and three different temperatures (35 °C, 40°C and 50°C). The impregnation was confirmed by FTIR and DSC demonstrated the amorphization of the drug upon impregnation. The in vitro elution profile in artificial urine solution (AUS) during degradation of a biodegradable ureteral stent loaded with ketoprofen was evaluated. According to the kinetics results these systems have shown to be very promising for the release ketoprofen in the first 72 h, which is the necessary time for anti-inflammatory delivery after the surgical procedure. The in vitro release studied revealed an influence of the temperature on the impregnation yield, with a higher impregnation yield at 40°C. Higher yields were also obtained for gellan gum-based stents. The non-cytotoxicity characteristic of the developed ketoprofen-eluting biodegradable ureteral stents was evaluated in L929 cell line by MTS assay which demonstrated the feasibility of this product as a medical device.

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide-tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96. MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported. © 2010.

The fluid phase behaviour for the binary systems carbon dioxide+cyclobutanone and propane+cyclobutanone has been determined experimentally, using Cailletet equipment. For both the systems bubble points have been determined for a number of isopleths covering the whole mole fraction range. Additionally, for the binary system carbon dioxide+cyclobutanone dew points and critical points could be observed for a number of overall-compositions rich in carbon dioxide. The temperature and pressure range were, respectively, from 278 to 369K and from 0.1 to 14.0MPa. Correlation of the experimental data of both systems has been performed using the Soave-Redlich-Kwong (SRK) equation of state. Satisfactory results have been achieved using only one binary interaction parameter. © 2003 Elsevier B.V. All rights reserved.

The design and production of structures with nanometer-sized polymer films based on layer-by-layer (LbL) are of particular interest for tissue engineering since they allow the precise control of physical and biochemical cues of implantable devices. In this work, a method is developed for the preparation of nanostructured hollow multilayers tubes combining LbL and template leaching. The aim is to produce hollow tubes based on polyelectrolyte multilayer films with tuned physical-chemical properties and study their effects on cell behavior. The final tubular structures are characterized by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), microscopy, swelling, and mechanical tests, including dynamic mechanical analysis (DMA) in physiological simulated conditions. It is found that more robust films could be produced upon chemical cross-linking with genipin. In particular, the mechanical properties confirms the viscoelastic properties and a storage and young modulus about two times higher. The water uptake decreases from about 390{%} to 110{%} after the cross-linking. The biological performance is assessed in terms of cell adhesion, viability, and proliferation. The results obtained with the cross-linked tubes demonstrate that these are more suitable structures for cell adhesion and spreading. The results suggest the potential of these structures to boost the development of innovative tubular structures for tissue engineering approaches.

Green technology actively seeks new solvents to replace common organic solvents that present inherent toxicity and have high volatility, leading to evaporation of volatile organic compounds to the atmosphere. Over the past two decades, ionic liquids (ILs) have gained enormous attention from the scientific community, and the number of reported articles in the literature has grown exponentially. Nevertheless, IL "greenness" is often challenged, mainly due to their poor biodegradability, biocompatibility, and sustainability. An alternative to ILs are deep eutectic solvents (DES). Deep eutectic solvents are defined as a mixture of two or more components, which may be solid or liquid and that at a particular composition present a high melting point depression becoming liquids at room temperature. When the compounds that constitute the DES are primary metabolites, namely, aminoacids, organic acids, sugars, or choline derivatives, the DES are so called natural deep eutectic solvents (NADES). NADES fully represent green chemistry principles. Can natural deep eutectic solvents be foreseen as the next generation solvents and can a similar path to ionic liquids be outlined? The current state of the art concerning the advances made on these solvents in the past few years is reviewed in this paper, which is more than an overview on the different applications for which they have been suggested, particularly, biocatalysis, electrochemistry, and extraction of new data. Citotoxicity of different NADES was evaluated and compared to conventional imidazolium-based ionic liquids, and hints at the extraction of phenolic compounds from green coffee beans and on the foaming effect of NADES are revealed. Future perspectives on the major directions toward which the research on NADES is envisaged are here discussed, and these comprised undoubtedly a wide range of chemically related subjects. © 2014 American Chemical Society.

© 2017 Elsevier B.V. The preparation of natural deep eutectic solvents (NADESs) from cheap and readily available raw materials is reported. In this work, we have considered mixtures of choline chloride (CC) or betaine (Bet) with 3 sugar molecules (glucose (Glu), xylose (Xyl) and sucrose (Suc)) and 2 carboxylic acids (citric (CA) and tartaric (Tart) acids). The formation of NADESs was investigated by polarized optical microscopy (POM) and differential scanning calorimetry (DSC). The CC mixtures give origin to NADESs for 1:1 M ratio with the sugar molecules and for 2:1, 1:1 and 1:2 with the carboxylic acids, while Bet mixtures only formed NADES with the carboxylic acids. The effect of water content (up to 5{%} (wt.{%})) and temperature in conductivity and rheology were characterized. The NADESs were found to be non-thixotropic, Newtonian liquids with high viscosity, decreasing with increasing temperature and water content. The conductivity is limited by charge carrier mobility, thus increasing with water content and temperature.

This work addresses the preparation of 3D porous scaffolds of blends of chitosan and poly(l-lactic acid), CHT and PLLA, using supercritical fluid technology. Supercritical assisted phase-inversion was used to prepare scaffolds for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage regeneration. On the other hand, PLLA is a synthetic biodegradable polymer widely used for biomedical applications. Supercritical assisted phase-inversion experiments were carried out in samples with different polymer ratios and different polymer solution concentrations. The effect of CHT:PLLA ratio and polymer concentration and on the morphology and topography of the scaffolds was assessed by SEM and Micro-CT. Infra-red spectroscopic imaging analysis of the scaffolds allowed a better understanding on the distribution of the two polymers within the matrix. This work demonstrates that supercritical fluid technology constitutes a new processing technology, clean and environmentally friendly for the preparation of scaffolds for tissue engineering using these materials. © 2010 Elsevier B.V.

This paper presents a novel approach toward the production of hybrid alginate–lignin aerogels. The key idea of the approach is to employ pressurized carbon dioxide for gelation. Exposure of alginate and lignin aqueous alkali solution containing calcium carbonate to CO2at 4.5 MPa resulted in a hydrogel formation. Various lignin and CaCO3concentrations were studied. Stable hydrogels could be formed up to 2:1 (w/w) alginate-to-lignin ratio (1.5 wt{%} overall biopolymer concentration). Upon substitution of water with ethanol, gels were dried in supercritical CO2to produce aerogels. Aerogels with bulk density in the range 0.03–0.07 g/cm3, surface area up to 564 m2/g and pore volume up to 7.2 cm3/g were obtained. To introduce macroporosity, the CO2induced gelation was supplemented with rapid depressurization (foaming process). Macroporosity up to 31.3 ± 1.9{%} with interconnectivity up to 33.2 ± 8.3{%} could be achieved at depressurization rate of 3 MPa/min as assessed by micro-CT. Young's modulus of alginate–lignin aerogels was measured in both dry and wet states. Cell studies revealed that alginate–lignin aerogels are non-cytotoxic and feature good cell adhesion making them attractive candidates for a wide range of applications including tissue engineering and regenerative medicine.

Electrospun structures were proposed as scaffolds owing to their morphological and structural similarities with the extracellular matrix found in many native tissues. These fibrous structures were also proposed as drug release systems by exploiting the direct dependence of the release rate of a drug on the surface area. An osteogenic differentiation factor, dexamethasone (DEX), was incorporated into electrospun polycaprolactone (PCL) nanofibers at different concentrations (5, 10, 15 and 20 wt.{%} polymer), in a single-step process. The DEX incorporated into the polymeric carrier is in amorphous state, as det ermined by DSC, and does not influence the typical nanofibers morphology. In vitro drug release studies demonstrated that the dexamethasone release was sustained over a period of 15 days. The bioactivity of the released dexamethasone was assessed by cultivating human bone marrow mesenchymal stem cells (hBMSCs) on 15 wt.{%} DEX-loaded PCL NFMs, under dexamethasone-absent osteogenic differentiation medium formulation. An increased concentration of alkaline phosphatase and deposition of a mineralized matrix was observed. Phenotypic and genotypic expression of osteoblastic-specific markers corroborates the osteogenic activity of the loaded growth/differentiation factor. Overall data suggests that the electrospun biodegradable nanofibers can be used as carriers for the sustained release of growth/differentiation factors relevant for bone tissue engineering strategies. © 2010 Elsevier Ltd.

A marine derived polysaccharide, ulvan, extracted from green algae, was combined with poly-d, l-lactic acid (PDLLA) in order to produce a novel scaffold for bone tissue engineering applications. Three dimensional (3D) scaffolds of PDLLA loaded with ulvan particles were originally prepared by subcritical fluid sintering with carbon dioxide at 40°C and 50 bar. Prepared matrixes were characterized in order to validate their suitability to be used as scaffolds for bone tissue regeneration. Characterization included micro-computed tomography, mechanical compression testing, water uptake and degradation testing, and cytotoxicity assays. In addition, ulvan particles loaded with dexamethasone, were also dispersed within the PDLLA matrix and the respective release profile from the samples was evaluated. Prepared PDLLA scaffolds enriched with ulvan particles demonstrated appropriate physicochemical and cytocompatible features to be used for the envisaged applications. On the other hand, the release of dexamethasone from ulvan particles embedded within the PDLLA matrix revealed that the designed systems can be potentially suitable for localized drug delivery. These results further contribute to the establishment of ulvan as a potential novel biomaterial. © 2012 Elsevier B.V. All rights reserved.

Supercritical fluid technology has proven to be useful for many pharmaceutical applications and is now emerging as an alternative to conventional processes for the preparation of 3D structures and injectable particles suitable to be used in regenerative medicine. A current overview of the basic principles underlying supercritical fluid technology, the state of the art and future potential of this technology are presented.

Phase equilibrium measurements of single and mixed organic clathrate hydrates with hydrogen were determined within a pressure range of 2.0-14.0. MPa. The organic compounds studied were furan, 2,5-dihydrofuran, tetrahydropyran, 1,3-dioxolane and cyclopentane. These organic compounds are known to form structure II clathrate hydrates with water. It was found that the addition of hydrogen to form a mixed clathrate hydrate increases the stability compared to the single organic clathrate hydrates. Moreover, the mixed clathrate hydrate also has a much higher stability compared to a pure hydrogen structure II clathrate hydrate. Therefore, the organic compounds act as promoter materials. The stabilities of the single and mixed organic clathrate hydrates with hydrogen showed the following trend in increasing order: 1,3-dioxolane {\textless} 2,5-dihydrofuran {\textless} tetrahydropyran {\textless} furan {\textless} cyclopentane, indicating that both size and geometry of the organic compound determine the stability of the clathrate hydrates. © 2011 Elsevier B.V.

The possibility to fabricate marine collagen porous structures crosslinked with genipin under high pressure carbon dioxide is investigated. Collagen from shark skin is used to prepare pre-scaffolds by freeze-drying. The poor stability of the structures and low mechanical properties require crosslinking of the structures. Under dense CO 2 atmosphere, crosslinking of collagen pre-scaffolds is allowed for 16 h. Additionally, the hydrogels are foamed and the scaffolds obtained present a highly porous structure. In vitro cell culture tests performed with a chondrocyte-like cell line show good cell adherence and proliferation, which is a strong indication of the potential of these scaffolds to be used in tissue cartilage tissue engineering. The development of an optimized processing technique for the preparation of stable structures from marine origin collagen is described. The samples are processed under a dense carbon dioxide atmosphere that promotes crosslinking and enhances the morphology of the 3D architectures obtained. © 2013 WILEY-VCH Verlag GmbH {&} Co. KGaA, Weinheim.