Publications

Export 30 results:
Sort by: [ Author  (Asc)] Title Type Year
A B C [D] E F G H I J K L M N O P Q R S T U V W X Y Z   [Show ALL]
D
Duarte AR, Maniglio D, Sousa N, Mano JF, Reis RL, Migliaresi C. {From honeycomb- to microsphere-patterned surfaces of poly(lactic acid) and a starch-poly(lactic acid) blend via the breath figure method.}. Journal of applied biomaterials {&} functional materials. 2016;15. Abstractpdf

BACKGROUND This study investigated the preparation of ordered patterned surfaces and/or microspheres from a natural-based polymer, using the breath figure and reverse breath figure methods. METHODS Poly(D,L-lactic acid) and starch poly(lactic acid) solutions were precipitated in different conditions - namely, polymer concentration, vapor atmosphere temperature and substrate - to evaluate the effect of these conditions on the morphology of the precipitates obtained. RESULTS The possibility of fine-tuning the properties of the final patterns simply by changing the vapor atmosphere was also demonstrated here using a range of compositions of the vapor phase. Porous films or discrete particles are formed when the differences in surface tension determine the ability of polymer solution to surround water droplets or methanol to surround polymer droplets, respectively. In vitro cytotoxicity was assessed applying a simple standard protocol to evaluate the possibility to use these materials in biomedical applications. Moreover, fluorescent microscopy images showed a good interaction of cells with the material, which were able to adhere on the patterned surfaces after 24 hours in culture. CONCLUSIONS The development of patterned surfaces using the breath figure method was tested in this work for the preparation of both poly(lactic acid) and a blend containing starch and poly(lactic acid). The potential of these films to be used in the biomedical area was confirmed by a preliminary cytotoxicity test and by morphological observation of cell adhesion.

Duarte AR, Casimiro T, Aguiar-Ricardo A, Simplício AL, Duarte CM. {Supercritical fluid polymerisation and impregnation of molecularly imprinted polymers for drug delivery}. Journal of Supercritical Fluids. 2006;39:102-6. Abstract

Herein the preparation of molecularly imprinted polymers (MIPs) using supercritical fluid technology is evaluated. Poly(diethylene glycol dimethacrylate), polyDEGDMA, was synthesised in supercritical carbon dioxide (scCO2) using a carboxylic acid end-capped perfluoropolyether oil as stabiliser. Polymerisations were carried out in the presence of different concentrations of two different template drug molecules, salicylic acid and acetylsalicylic acid. Results suggest that molecular imprinted polymers were successfully prepared by supercritical polymerisation and then impregnated with the template in order to prepare controlled release systems. © 2006 Elsevier B.V. All rights reserved.

Duarte AR, Mano JF, Reis RL. {Preparation of chitosan scaffolds loaded with dexamethasone for tissue engineering applications using supercritical fluid technology}. European Polymer Journal. 2009;45:141-8. Abstract

Supercritical fluid impregnation was tested to prepare a new scaffold loaded with a bioactive compound. Dexamethasone is used in osteogenic media to direct the differentiation of stem cells towards the osteogenic lineage. Dexamethasone was impregnated in chitosan scaffolds at different operating conditions, in order to optimize the impregnation process. Pressure and temperature affect the carbon dioxide density and influence the swelling of the polymer and the drug solubility in the fluid phase, therefore these are two important parameters that were studied in this work. Chitosan sponges prepared by freeze drying were impregnated with the active compound at pressures from 8.0 up to 14.0 MPa and temperatures from 35 up to 55 °C. The effect of the impregnation contact time (3 h and 6 h) was also evaluated. From the experiments performed we can conclude that the yield of impregnation is lower when increasing pressure and temperature. The contact time will mainly influence the amount of drug impregnated in the scaffold and for higher contact times the impregnation yield is also higher. Scanning electron microscopy shows particles of dexamethasone in the bulk of the scaffold, which confirms the feasibility of the supercritical fluid impregnation technology for the preparation of delivery devices. The loading capacity of the scaffolds was determined by spectroscopic analysis and the highest loading was achieved for the experiments performed at 8.0 MPa and 35 °C. Furthermore, in vitro drug release studies were carried out and the results show that dexamethasone was sustainably released. Supercritical fluid impregnation proved to be feasible for the preparation of a drug delivery system for bone tissue engineering purposes. © 2008 Elsevier Ltd. All rights reserved.

Duarte AR, Mano JF, Reis RL. {Perspectives on: Supercritical fluid technology for 3d tissue engineering scaffold applications}. Journal of Bioactive and Compatible Polymers. 2009;24:385-400. Abstract

Supercritical fluid technology has proven to be useful for many pharmaceutical applications and is now emerging as an alternative to conventional processes for the preparation of 3D structures and injectable particles suitable to be used in regenerative medicine. A current overview of the basic principles underlying supercritical fluid technology, the state of the art and future potential of this technology are presented.

Duarte AR, Shariati A, Rovetto LJ, Peters CJ. {Water cavities of sH clathrate hydrate stabilized by molecular hydrogen: Phase equilibrium measurements}. Journal of Physical Chemistry B. 2008;112. Abstract

In this experimental phase equilibrium study, we show for the first time that it is possible to stabilize structure sH of hydrogen clathrate hydrate with the help of some selected promoters. It was established that the formation pressures of these systems are significantly higher than that of structure sII of hydrogen clathrate hydrate when tetrahydrofuran (THF) is used as a promoter. Although no experimental evidence is available yet, it is estimated that the hydrogen storage capacity of structure sH can be as high as 1.4 wt {%} of H 2 , which is about 40{%} higher compared to the hydrogen storage capacity in structure sH. © 2008 American Chemical Society.

Duarte AR, Mano J?, Reis RL. {Enzymatic degradation of 3D scaffolds of starch-poly-(?-caprolactone) prepared by supercritical fluid technology}. Polymer Degradation and Stability. 2010;95:2110-7. Abstract

Starch-based polymers have been proposed for different tissue engineering applications due to their inherent properties. In this work, a polymeric blend of starch-poly-(?-caprolactone) (SPCL) was processed using supercritical fluid technology, namely, by supercritical assisted phase inversion. As SPCL is a biodegradable polymer, the matrices produced are susceptible of undergoing enzymatic degradation upon implantation in the human body. In vitro assessment of the enzymatic degradation of SPCL was carried out in different buffer solutions containing a-amylase and/or lipase. The effect of the presence ofthese enzymes was studied by monitoring different parameters in order to characterise both bulk and the surface of the scaffolds. As regards to bulk analysis, weight loss of the samples incubated for 1, 3, 7, 14 and 21 days was determined, further differential scanning calorimetry was carried out. The morphology of the scaffolds after these periods was analysed by micro-computed tomography (?-CT) and surface chemistry was characterised by infra-red spectroscopy and contact angle measurements. Results suggest that SPLC scaffolds undergo bulk degradation, which is typically characterised by hydrolysis of chemical bonds in the polymer chain at the centre of the matrix, resulting in a highly porous material. ? 2010 Elsevier Ltd. All rights reserved.

Duarte AR, Silva SS, Mano JF, Reis RL. {Ionic liquids as foaming agents of semi-crystalline natural-based polymers}. Green Chemistry. 2012;14. Abstract

In this work, the ability to foam semi-crystalline natural-based polymers by supercritical fluid technology is evaluated. The application of this technique to natural polymers has been limited due to the fact that they are normally semi-crystalline polymers, which do not plasticize in the presence of carbon dioxide. This can be overcome by the use of plasticizers, such as glycerol, which is a commonly used plasticizer, or ionic liquids, which have recently been proposed as plasticizing agents for different polymers. Following the green chemistry principles, the main aim is, hereafter, the design and development of new 3D architectures of natural-based polymers, combining ionic liquids (IL) and supercritical fluid (SCF) technology. A polymeric blend of starch, one of the most abundantly occurring natural polymers, and poly-$ε$-caprolactone, a synthetic polymer, which is a biodegradable aliphatic polyester commonly used in an array of biomedical applications (SPCL), was processed by supercritical fluid foaming, at different operating conditions, namely pressure (10.0 up to 20.0 MPa), temperature (35 up to 60 °C) and soaking time (30 min up to 3 h). The ionic liquid tested in this work was 1-butyl-3-methylimidazolium acetate ([bmim]Ac). The interactions between SPCL and [bmim] Ac or glycerol were analysed by Fourier transform infrared spectroscopy, differential scanning calorimetry and by mechanical tests, using both tensile and compressive modes. Morphological analysis, porosity, interconnectivity and pore size distribution of the matrixes were evaluated and the morphology was analyzed by scanning electron microscopy and by micro-computed tomography. To our knowledge the use of ionic liquids as foaming agents is reported here for the first time. The results obtained suggest that this approach can further promote the development of composite polymer-IL materials, particularly for catalysis, chromatography, extraction and separation purposes. © The Royal Society of Chemistry 2012.

Duarte AR, Mano JF, Reis RL. {The role of organic solvent on the preparation of chitosan scaffolds by supercritical assisted phase inversion}. Journal of Supercritical Fluids. 2012;72:326-32. Abstract

The aim of this study was to evaluate the possibility of preparing chitosan porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a natural biocompatible polymer, chitosan for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage. Supercritical assisted phase inversion experiments were carried out and the effect of different organic solvents on the morphology of the scaffolds was assessed. Chitosan scaffold morphology, porosity and pore size were evaluated by SEM and micro-CT. A thermodynamic analysis of the process was carried out and insights on the solubility parameter and Flory-Huggins interaction parameters are given. The preparation of a highly porous and interconnected structure of a natural material, chitosan, using a clean and environmentally friendly technology constitutes a new processing technology for the preparation of scaffolds for tissue engineering using these materials. © 2011 Elsevier B.V.

Duarte AR, Santiago S, {De Sousa} HC, Duarte CM. {Solubility of acetazolamide in supercritical carbon dioxide in the presence of ethanol as a cosolvent}. Journal of Chemical and Engineering Data. 2005;50:216-20. Abstract

Equilibrium solubility of acetazolamide, a carbonic-anhydrase inhibitor, in supercritical carbon dioxide in the presence of a cosolvent was measured by a static analytical method for three mole fractions of ethanol (5, 7.5, and 10) {%} at 313.0 K from (13.0 to 21.0) MPa and at 323.0 K from (13.0 to 21.0) MPa for a mole fraction of 5{%} ethanol The presence of a cosolvent (ethanol) was essential for the solubilization of the bioactive compound in supercritical carbon dioxide. The results obtained are useful for the design of supercritical processes with this drug. Experimental solubility data were correlated with two enhanced density-based models (Chrastil, I. Solubility of Solids in Supercritical Gases. J. Phys. Chem. 1982, 86, 3016-3021; Santiago, J. M.; Teja, A. S. The solubility of solids in supercritical fluids. Fluid Phase Equilib. 1999, 158-160, 501-510).

Duarte AR, Martins C, Coimbra P, Gil MH, de Sousa HC, Duarte CM. {Sorption and diffusion of dense carbon dioxide in a biocompatible polymer}. Journal of Supercritical Fluids. 2006;38:392-8. Abstract

Mass sorption and diffusion coefficients in one acrylate biocompatible copolymer contacted with supercritical (sc) carbon dioxide are reported. Equilibrium solubility of dense carbon dioxide in poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate) (P(MMA-EHA-EGDMA)) was studied by a gravimetric method in a temperature range from 308 to 323 K and a pressure range from 10.0 to 20.0 MPa. The cross-linked copolymer presented Fickian behavior and Fick's diffusion model was applied to determine the amount of carbon dioxide present and the diffusion coefficients. Diffusion coefficients for the sorption under supercritical conditions and desorption at ambient conditions were determined and compared. Samples of P(MMA-EHA-EGDMA) with different thickness were used for comparison of the maximum sorption degree. Polymerization conditions were also varied in order to evaluate the influence of the molecular weight of the copolymer in the CO2 sorption process. To investigate the possibility of impregnating this acrylate copolymer with an anti-inflammatory drug, a preliminary experiment was performed. © 2005 Elsevier B.V. All rights reserved.

Duarte RM, Varanda P, Reis RL, Duarte AR, Correia-Pinto J. {Biomaterials and Bioactive Agents in Spinal Fusion}. Tissue Engineering Part B: Reviews. 2017;23:ten.teb.2017.0072. Abstractpdf

Management of degenerative spine pathologies frequently leads to the need for spinal fusion (SF), where bone growth is induced toward stabilization of the interventioned spine. Autologous bone graft (ABG) remains the gold-standard inducer, whereas new bone graft substitutes attempt to achieve effective de novo bone formation and solid fusion. Limited fusion outcomes have driven motivation for more sophisticated and multidisciplinary solutions, involving new biomaterials and/or biologics, through innovative delivery platforms. The present review will analyze the most recent body of literature that is focused on new approaches for consistent bone fusion of spinal vertebrae, including the development of new biomaterials that pursue physical and chemical aptitudes; the delivery of growth factors (GF) to accelerate new bone formation; and the use of cells to improve functional bone development. Bone graft substitutes currently in clinical practice, such as demineralized bone matrix and ceramics, are still used as a starting point for the study of new bioactive agents. Polyesters such as polycaprolactone and polylactic acid arise as platforms for the development of composites, where a mineral element and cell/GF constitute the delivery system. Exciting fusion outcomes were obtained in several small and large animal models with these. On what regards bioactive agents, mesenchymal stem cells, preferentially derived from the bone marrow or adipose tissue, were studied in this context. Autologous and allogeneic approaches, as well as osteogenically differentiated cells, have been tested. These cell sources have further been genetically engineered for specific GF expression. Nevertheless, results on fusion efficacy with cells have been inconsistent. On the other hand, the delivery of GF (most commonly bone morphogenetic protein-2 [BMP-2]) has provided favorable outcomes. Complications related to burst release and dosing are still the target of research through the development of controlled release systems or alternative GF such as Nel-like molecule-1 (NELL-1), Oxysterols, or COMP-Ang1. Promising solutions with new biomaterial and GF compositions are becoming closer to the human patient, as these evidence high-fusion performance, while offering cost and safety advantages. The use of cells has not yet proved solid benefits, whereas a further understanding of cell behavior remains a challenge.

Duarte AR, Roy C, Vega-González A, Duarte CM, Subra-Paternault P. {Preparation of acetazolamide composite microparticles by supercritical anti-solvent techniques}. International Journal of Pharmaceutics. 2007;332:132-9. Abstract

The possibility of preparation of ophthalmic drug delivery systems using compressed anti-solvent technology was evaluated. Eudragit RS 100 and RL 100 were used as drug carriers, acetazolamide was the model drug processed. Compressed anti-solvent experiments were carried out as a semi-continuous or a batch operation from a liquid solution of polymer(s) + solute dissolved in acetone. Both techniques allowed the recovery of composite particles, but the semi-continuous operation yielded smaller and less aggregated populations than the batch operation. The release behaviour of acetazolamide from the prepared microparticles was studied and most products exhibited a slower release than the single drug. Moreover, the release could be controlled to some extent by varying the ratio of the two Eudragit used in the formulation and by selecting one or the other anti-solvent technique. Simple diffusion models satisfactorily described the release profiles. Composites specifically produced by semi-continuous technique have a drug release rate controlled by a diffusion mechanism, whereas for composites produced by the batch operation, the polymer swelling also contributes to the overall transport mechanism. © 2006 Elsevier B.V. All rights reserved.

Duarte AR, Mano JF, Reis RL. {Dexamethasone-loaded scaffolds prepared by supercritical-assisted phase inversion}. Acta Biomaterialia. 2009;5:2054-62. Abstract

The aim of this study was to evaluate the possibility of preparing dexamethasone-loaded starch-based porous matrices in a one-step process. Supercritical phase inversion technique was used to prepare composite scaffolds of dexamethasone and a polymeric blend of starch and poly(l-lactic acid) (SPLA) for tissue engineering purposes. Dexamethasone is used in osteogenic media to direct the differentiation of stem cells towards the osteogenic lineage. Samples with different drug concentrations (5-15 wt.{%} polymer) were prepared at 200 bar and 55 °C. The presence of dexamethasone did not affect the porosity or interconnectivity of the polymeric matrices. Water uptake and degradation studies were also performed on SPLA scaffolds. We conclude that SPLA matrices prepared by supercritical phase inversion have a swelling degree of nearly 90{%} and the material presents a weight loss of ∼25{%} after 21 days in solution. Furthermore, in vitro drug release studies were carried out and the results show that a sustained release of dexamethasone was achieved over 21 days. The fitting of the power law to the experimental data demonstrated that drug release is governed by an anomalous transport, i.e., both the drug diffusion and the swelling of the matrix influence the release of dexamethasone out of the scaffold. The kinetic constant was also determined. This study reports the feasibility of using supercritical fluid technology to process in one step a porous matrix loaded with a pharmaceutical agent for tissue engineering purposes. © 2009 Acta Materialia Inc.

Duarte AR, Mano JF, Reis RL. {Supercritical fluids in biomedical and tissue engineering applications: a review}. International Materials Reviews. 2009;54:214-22. Abstractpdf

Over the past several years, the definition of a scaffold for tissue engineering has changed dramatically, from a material that acts only as an inert structural support for cell attachment to serving as a more complex and dynamic environment for tissue development. This paper is a review on the existing and on the new emerging techniques based on supercritical fluid technology for the preparation of scaffolds and particles for tissue engineering applications. Supercritical fluid technology has already proven to be feasible for many pharmaceutical applications and is now emerging as an alternative to conventional materials' processing methods for the preparation of three-dimensional structures and injectable particles suitable to be used in regenerative medicine. The basic principles underlying each technique are here presented as well as the advantages and disadvantages of each process. The state of the art is reviewed and the major conclusions of the studies reported in the literature are discussed.

Duarte AR, Mano JF, Reis RL. {Supercritical phase inversion of starch-poly($ε$-caprolactone) for tissue engineering applications}. Journal of Materials Science: Materials in Medicine. 2010;21:533-40. Abstract

In this work, a starch-based polymer, namely a blend of starch-poly(epsilon-caprolactone) was processed by supercritical assisted phase inversion process. This processing technique has been proposed for the development of 3D structures with potential applications in tissue engineering applications, as scaffolds. The use of carbon dioxide as non-solvent in the phase inversion process leads to the formation of a porous and interconnected structure, dry and free of any residual solvent. Different processing conditions such as pressure (from 80 up to 150 bar) and temperature (45 and 55 degrees C) were studied and the effect on the morphological features of the scaffolds was evaluated by scanning electron microscopy and micro-computed tomography. The mechanical properties of the SPCL scaffolds prepared were also studied. Additionally, in this work, the in vitro biological performance of the scaffolds was studied. Cell adhesion and morphology, viability and proliferation was assessed and the results suggest that the materials prepared are allow cell attachment and promote cell proliferation having thus potential to be used in some for biomedical applications.

Duarte AR, Mano JF, Reis RL. {Preparation of chitosan scaffolds for tissue engineering using supercritical fluid technology}. Vol 636-637.; 2010. Abstract

The aim of this study was to evaluate the possibility of preparing chitosan porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a natural biocompatible polymer, chitosan, for tissue engineering purposes. The physicochemical and biological properties of chitosan make it an excellent material for the preparation of drug delivery systems and for the development of new biomedical applications in many fields from skin to bone or cartilage. Immersion precipitation experiments were carried out at different operational conditions in order to optimize the processing method. The effect of different organic solvents on the morphology of the scaffolds was assessed. Additionally, different parameters that influence the process were tested and the effect of the processing variables such as polymer concentration, temperature and pressure in the chitosan scaffold morphology, porosity and interconnectivity was evaluated by micro computed tomography. The preparation of a highly porous and interconnected structure of a natural material, chitosan, using a clean and environmentally friendly technology constitutes a new processing technology for the preparation of scaffolds for tissue engineering using these materials. © (2010) Trans Tech Publications.

Duarte AR, Simplicio AL, Vega-González A, Subra-Paternault P, Coimbra P, Gil MH, de Sousa HC, Duarte CM. {Supercritical fluid impregnation of a biocompatible polymer for ophthalmic drug delivery}. Journal of Supercritical Fluids. 2007;42:373-7. Abstract

Supercritical fluid impregnation was tested to prepare a new ophthalmic drug delivery device. Poly(methylmethacrylate-co-ethylhexylacrylate-co-ethyleneglycoldimethacr ylate), P(MMA-EHA-EGDMA) has been proposed by Mariz [M. Mariz, Preparação de uma lente intra-ocular dotada de um sistema de libertação controlada de fármaco, Master Thesis, Universidade de Coimbra, 1999] as a promising matrix to be used for intraocular delivery of anti-inflammatory drugs used in eye surgery. This matrix was successfully impregnated with flurbiprofen, a non-steroidal anti-inflammatory agent. The success of the impregnation was evaluated by scanning electron microscopy (SEM) analysis and also by in vitro drug release studies. The effect of some operating parameters was evaluated, namely, pressure and contact time. The operating pressure will influence both the solubility of the drug in the supercritical fluid but also the sorption degree of the polymeric matrix in the presence of carbon dioxide. The solubility of the drug in carbon dioxide and the sorption degree are reported in previous studies. A comparison between the batch and the semi-continuous impregnation process is also presented. The supercritical fluid impregnation proved to be feasible for the preparation of a new ophthalmic drug delivery system. The drug release profiles suggest that the drug can be released up to three months, which is a major advantage for the prevention of the inflammatory response after ophthalmic surgery. © 2007 Elsevier B.V. All rights reserved.

Duarte AR, Mano JF, Reis RL. {Thermosensitive polymeric matrices for three-dimensional cell culture strategies}. Acta Biomaterialia. 2011;7. Abstract

A completely new strategy for cell culture focusing on the design of three-dimensional (3D) smart surfaces by supercritical fluid technology has been developed. This approach might overcome the limitations on cell expansion and proliferation of currently existing techniques. An alternative technology, based on supercritical carbon dioxide, was used to polymerize poly(N- isopropylacrylamide) (PNIPAAm) and to foam poly(d,l-lactic acid) (P D,L LA), creating a thermosensitive 3D structure which has proven to have potential as a substrate for cell growth and expansion. We demonstrated that the thermosensitive matrices promoted cell detachment, thus P D,L LA scaffolds have the potential to be used as substrates for cell growth and expansion avoiding enzymatic and mechanical methods of cell harvesting. The harvested cells were replated to evaluate their viability, which was not compromised. A major advantage of this technology is the fact that the prepared materials can be recovered and reused. Therefore, the same substrate can be recycled and reused for different batches. An indirect impact of the technology developed is related to the field of biotechnology, as this novel technology for cell expansion can be applied to any adherent cell cultures. © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Duarte AR, Santo VE, Alves A, Silva SS, Moreira-Silva J, Silva TH, Marques AP, Sousa RA, Gomes ME, Mano JF, Reis RL. {Unleashing the potential of supercritical fluids for polymer processing in tissue engineering and regenerative medicine}. Journal of Supercritical Fluids. 2013;79:177-85. Abstractpdf

One of the major scientific challenges that tissue engineering and regenerative medicine (TERM) faces to move from benchtop to bedside regards biomaterials development, despite the latest advances in polymer processing technologies. A variety of scaffolds processing techniques have been developed and include solvent casting and particles leaching, compression molding and particle leaching, thermally induced phase separation, rapid prototyping, among others. Supercritical fluids appear as an interesting alternative to the conventional methods for processing biopolymers as they do not require the use of large amounts of organic solvents and the processes can be conducted at mild temperatures. However, this processing technique has only recently started to receive more attention from researchers. Different processing methods based on the use of supercritical carbon dioxide have been proposed for the creation of novel architectures based on natural and synthetic polymers and these will be unleashed in this paper. © 2013 Elsevier B.V. All rights reserved.

Duarte AR, Gordillo MD, Cardoso MM, Simplício AL, Duarte CM. {Preparation of ethyl cellulose/methyl cellulose blends by supercritical antisolvent precipitation}. International Journal of Pharmaceutics. 2006;311:50-4. Abstract

The supercritical antisolvent (SAS) technique was used to prepare ethyl cellulose/methyl cellulose blends, two biocompatible polymers commonly used as drug carriers in controlled delivery systems. Ethyl cellulose is widely used as a drug carrier. The drug release of the delivery devices can be controlled to some extent by addition of a water-soluble or water swellable polymer, such as methyl cellulose. This leads to the solubility enhancement of poorly water-soluble molecules. SAS experiments were carried out at different operational conditions and microspheres with mean diameters ranging from 5 to 30 $μ$m were obtained. The effect of CO2 and liquid flow, temperature and pressure on particle size and particle size distribution was evaluated. The microspheres were precipitated from a mixture of dichloromethane (DCM) and dimethylsulfoxide (DMSO) (4:1 ratio). The best process conditions for this mixture were according to our study 40°C and 80 bar. © 2006 Elsevier B.V. All rights reserved.

Duarte AR, Ferreira AS, Barreiros S, Cabrita E, Reis RL, Paiva A. {A comparison between pure active pharmaceutical ingredients and therapeutic deep eutectic solvents: Solubility and permeability studies}. European Journal of Pharmaceutics and Biopharmaceutics. 2017;114:296-304. Abstractpdf

THEDES, so called therapeutic deep eutectic solvents are here defined as a mixture of two components, which at a particular molar composition become liquid at room temperature and in which one of them is an active pharmaceutical ingredient (API). In this work, THEDES based on menthol complexed with three different APIs, ibuprofen (ibu), BA (BA) and phenylacetic acid (PA), were prepared. The interactions between the components that constitute the THEDES were studied by NMR, confirming that the eutectic system is formed by H-bonds between menthol and the API. The mobility of the THEDES components was studied by PFGSE NMR spectroscopy. It was determined that the self-diffusion of the species followed the same behavior as observed previously for ionic liquids, in which the components migrate via jumping between voids in the suprastructure created by punctual thermal fluctuations. The solubility and permeability of the systems in an isotonic solution was evaluated and a comparison with the pure APIs was established through diffusion and permeability studies carried out in a Franz cell. The solubility of the APIs when in the THEDES system can be improved up to 12 fold, namely for the system containing ibu. Furthermore, for this system the permeability was calculated to be 14 × 10−5 cm/s representing a 3 fold increase in comparison with the pure API. With the exception of the systems containing PA an increase in the solubility, coupled with an increase in permeability was observed. In this work, we hence demonstrate the efficiency of THEDES as a new formulation for the enhancement of the bioavailability of APIs by changing the physical state of the molecules from a solid dosage to a liquid system.

Duarte AR, Roy C, Vega-González A, Duarte CM, Subra-Paternault P. {Preparation of acetazolamide composite microparticles by supercritical anti-solvent techniques}. International Journal of Pharmaceutics. 2007;332:132-9. Abstract

The possibility of preparation of ophthalmic drug delivery systems using compressed anti-solvent technology was evaluated. Eudragit RS 100 and RL 100 were used as drug carriers, acetazolamide was the model drug processed. Compressed anti-solvent experiments were carried out as a semi-continuous or a batch operation from a liquid solution of polymer(s) + solute dissolved in acetone. Both techniques allowed the recovery of composite particles, but the semi-continuous operation yielded smaller and less aggregated populations than the batch operation. The release behaviour of acetazolamide from the prepared microparticles was studied and most products exhibited a slower release than the single drug. Moreover, the release could be controlled to some extent by varying the ratio of the two Eudragit used in the formulation and by selecting one or the other anti-solvent technique. Simple diffusion models satisfactorily described the release profiles. Composites specifically produced by semi-continuous technique have a drug release rate controlled by a diffusion mechanism, whereas for composites produced by the batch operation, the polymer swelling also contributes to the overall transport mechanism. © 2006 Elsevier B.V. All rights reserved.

Duarte AR, Mano JF, Reis RL. {Preparation of starch-based scaffolds for tissue engineering by supercritical immersion precipitation}. Journal of Supercritical Fluids. 2009;49:279-85. Abstract

The aim of this study was to evaluate the possibility of preparing starch-based porous matrixes using supercritical fluid technology. Supercritical immersion precipitation technique was used to prepare scaffolds of a polymeric blend of starch and poly(l-lactic acid) for tissue engineering purposes.Immersion precipitation experiments were carried out at different operational conditions and highly porous and interconnected scaffolds were obtained. Two organic solvents, dichloromethane and chloroform were tested, and from the results obtained chloroform was the more favourable for the process. The effect of polymer solution concentration (5 up to 20 wt{%}), temperature (35 up to 55 °C) and pressure (100 up to 200 bar) in the SPLA (50:50 wt{%}) membrane morphology, porosity and interconnectivity was evaluated. All the conditions tested were in the region of total miscibility between the organic solvent and carbon dioxide. Additionally, a blend with a different starch-poly(l-lactic acid) ratio (30:70 wt{%}) was tested. Bicontinuous structures were formed indicating that the L-L demixing process that governs the phase inversion is the spinodal decomposition. © 2008 Elsevier B.V. All rights reserved.

Duarte AR, Caridade SG, Mano J?, Reis RL. {Processing of novel bioactive polymeric matrixes for tissue engineering using supercritical fluid technology}. Materials Science and Engineering C. 2009;29:2110-5. Abstract

The aim of this study was to develop a new process for the production of bioactive 3D scaffolds using a clean and environmentally friendly technology. The possibility of preparing composite scaffolds of Bioglass?? and a polymeric blend of starch and poly(l-lactic acid) (SPLA50) was evaluated. Supercritical phase-inversion technique was used to prepare inorganic particles loaded starch-based porous composite matrixes in a one-step process for bone tissue engineering purposes. Due to their osteoconductive properties some glasses and ceramics are interesting materials to be used for bone tissue engineering purposes; however their poor mechanical properties create the need of a polymeric support where the inorganic fraction can be dispersed. Samples impregnated with different concentrations of Bioglass?? (10 and 15{%} wt/wt polymer) were prepared at 200??bar and 55????C. The presence of Bioglass?? did not affect the porosity or interconnectivity of the polymeric matrixes. Dynamic mechanical analysis has proven that the modulus of the SPLA50 scaffolds increases when glass particles are impregnated within the matrix. In vitro bioactivity studies were carried out using simulated body fluid and the results show that a calcium-phosphate layer started to be formed after only 1??day of immersion. Chemical analysis of the apatite layer formed on the surface of the scaffold was performed by different techniques, namely EDS and FTIR spectroscopy and X-ray diffraction (XRD). The ion concentration in the simulated body fluid was also carried out by ICP analysis. Results suggest that a bone-like apatite layer was formed. This study reports the feasibility of using supercritical fluid technology to process, in one step, a porous matrix loaded with a bioactive material for tissue engineering purposes. ?? 2009 Elsevier B.V. All rights reserved.