@article {doi:10.1680/jmacr.18.00209,
	title = {Behaviour of reinforced-concrete flat slabs with stirrups under reversed horizontal cyclic loading},
	journal = {Magazine of Concrete Research},
	volume = {72},
	number = {7},
	year = {2020},
	note = {n/a},
	pages = {339-356},
	abstract = {<p>This paper describes the experimental campaign to study the behaviour of reinforced-concrete flat slab structures with steel stirrups as punching shear reinforcement, under combined vertical and horizontal cyclic loading. The vertical load was first applied and kept constant during the test, while, regarding the cyclic horizontal loading, imposed cyclic drifts were increased until failure. Four slab specimens with shear reinforcement were tested and the results compared to a control slab specimen without shear reinforcement. The studied variables were different shear reinforcement ratios and the number of stirrup layers. The slabs were 4{\textperiodcentered}15 {\texttimes} 1{\textperiodcentered}85 m2 and 0{\textperiodcentered}15 m thick, connected to two steel half-columns. The test setup used was developed by the research team and aimed to simulate the boundary conditions of a flat slab, representing the slab between middle spans in one direction and between zero bending moment points in the other direction. Results show that the use of steel stirrups as shear reinforcement is very effective, increasing shear, drift and energy dissipation capacities. The obtained results were also compared to the provisions given by European and American codes.</p>
},
	doi = {10.1680/jmacr.18.00209},
	url = {https://doi.org/10.1680/jmacr.18.00209},
	author = {Almeida, Andr{\'e} F.O. and Alcobia, Bruno and Ornelas, Miguel and Marreiros, Rui and Ramos, Ant{\'o}nio Pinho}
}
