@article {FARIA2020718,
	title = {Influence of the top reinforcement detailing in the behaviour of flat slabs},
	journal = {Structures},
	volume = {23},
	year = {2020},
	note = {n/a},
	pages = {718 - 730},
	abstract = {<p>This paper studies the influence of different longitudinal top reinforcement detailing on the behaviour and punching capacity of flat slabs. Experimental and numerical studies were carried out. The experimental campaign consisted in testing three reinforced concrete slabs 2.20~m wide with a thickness equal to 0.15~m. The numerical study was conducted using the non-linear finite element software ATENA 3D. Using numerical models, which were calibrated using the experimental tests, a parametric study was carried out to include other design solutions beyond the tested ones. The parameters that were changed in this parametric study were the steel reinforcement ratio, the concrete strength and the detailing of the top steel reinforcement, namely using a solution with uniform distribution and other with a higher concentration of reinforcement near the column. Finally, the results were compared with predictions obtained using some of the existing codes (Eurocode 2 and Model Code 2010). From this study it can be concluded that concentrating the top flexural reinforcement, keeping the same total amount of top longitudinal reinforcement, results in a stiffer response, an increment in the punching resistance, and a decrease in the maximum vertical displacement.</p>
},
	keywords = {Flat slabs, Numerical analysis, Punching, Reinforced concrete},
	issn = {2352-0124},
	doi = {https://doi.org/10.1016/j.istruc.2019.12.007},
	url = {http://www.sciencedirect.com/science/article/pii/S2352012419302176},
	author = {Ricardo Faria and Marreiros, Rui and Ramos, Ant{\'o}nio Pinho and Catarina Jesus}
}
