Stanimir Valtchev

This chapter presents control methods applied in the operation of the series loaded series resonant (SLSR) power converters in a most efficient operation zone. The choice of the control method is affected by the objective to guarantee suitably the efficiency, being this method in the same time, relatively easy to apply. The first part of the chapter compares three basic principles of regulation: frequency mode (FM), pulse width mode (PWM), and their combination (PWM/FM). Finally, a new method for instantaneous regulation is developed. The proposed technique consists of a simplified observation of a state variable value to limit each portion of supplied energy, depending on the requirement for power in each half period. The result of this regulation is comparable to the current mode (CM) control applied to the hard-switching power converters. The viability of this new regulation method is demonstrated by simulations of its analogue circuit implementations and experimentally proved. The circuit is also prepared for the changes in the magnetic coupling (contactless energy transfer).

This chapter focuses on mid-range wireless power transfer (WPT) systems applied to electric vehicle (EV) battery chargers. The WPT is recently considered as an efficient electric energy transfer process between two or more points in space, without wiring. The technology associated with each specific process of WPT differs from case to case depending on the distance between those points and the power to be transferred between them. The widely adopted distance categories are named short-range, mid-range, and long-range. The short-range is normally defined as up to a few millimeters range. The mid-range is between a few millimeters and a few meters. The long-range distance is defined as a longer than that of the previous category, stretching up to a few kilometers.

The focus of this chapter is the electromagnetic interference (EMI) and the electromagnetic compatibility (EMC) that the wireless power transfer (WPT) systems reveal as problems. The wireless power transfer (WPT) was introduced by Nikola Tesla more than one hundred years ago, and only recently it attracted the attention of specialists, due to the improved technical means. The WPT technology now has many applications, especially for charging of various electronic devices (i.e., mobile phones, laptops, implants, and home appliances), informatics, and electronics equipment. The high-power equipment and installations (e.g., intelligent machining systems, robots, forklift trucks, and electric cars) are also getting wireless. Moreover, much attention has been focused on the electric transportation system for improving the safe and convenient charging of electric vehicle (EV) batteries.

Power Hardware-in-the-Loop (PHiL) system for asynchronous electric drives application based on power inverter with Field Programmable Gate Array (FPGA)-based control system is discussed. Proposed PHiL structure and scheme for asynchronous electric drives are under discussion as well. Described PHiL can be used for power inverters multi-stage testing.