Valtchev, {S. S. }, and {J. J. } Pamies-Teixeira,
"Culture of the European Student with an Insight to the Future Needs of the Global (European) Labour Market",
Proceedings of the European Politechnical University, vol. 1, no. NA, pp. 78–82, 1, 2012.
AbstractRecent issues of global heating and energy shortages are imposing a need to change our paradigm around transportation. Somehow, electric vehicles are progressively standing as a strong and necessary alternative for the society. Technically and technologically the acceptance of the EV is easier now than ever but the psychology of the consumers and the running business of internal combustion vehicles, the whole existing infrastructure are too much conservative to be changed easily. The changes in technology require changes in the engineering society and its human resources. The objective of this paper is to give a contribution to the discussion and reflection of potential future scenarios where EV/HEV‘s are spread across the society. It gives an overview of the range of knowledge and competences necessary for a sustainable and streamlined development of those. In fact, it is expected that a new kind of professional profiles need to be created or developed to supply the work market with the right human resources. The paper provides some discussion on the creation of new profiles or adaption of existing ones. Among different possible scenarios the creation of post-graduation courses for students holding undergraduate profiles in the fields referred to earlier would be an interesting and viable solution for fast response. The post graduation would be focused in specific key areas of the EV/HEV. Several factors are pointed out to endorse this scenario
Inácio, S., D. Inácio, J. M. Pina, S. Valtchev, M. V. Neves, and A. L. Rodrigues,
"An electrical gearbox by means of pole variation for induction and superconducting disc motor",
Journal of Physics: Conference Series, vol. 97, pp. 012221, 2008.
AbstractIn this paper, a poly-phase disc motor innovative feeding and control strategy, based on a variable poles approach, and its application to a HTS disc motor, are presented. The stator windings may be electronically commutated to implement a 2, 4, 6 or 8 poles winding, thus changing the motor's torque?speed characteristics. The motor may be a conventional induction motor with a conductive disc rotor, or a new HTS disc motor, with conventional copper windings at its two iron semi-stators, and a HTS disc as a rotor. The conventional induction motor's operation principle is related with the induced electromotive forces in the conductive rotor. Its behaviour, characteristics (namely their torque?speed characteristics for different number of pole pairs) and modelling through Steinmetz and others theories are well known. The operation principle of the motor with HTS rotor, however, is rather different and is related with vortices' dynamics and pinning characteristics; this is a much more complex process than induction, and its modelling is quite complicated. In this paper, the operation was simulated through finite-elements commercial software, whereas superconductivity was simulated by the E-J power law. The Electromechanical performances of both motors where computed and are presented and compared. Considerations about the systems overall efficiency, including cryogenics, are also discussed.
Matos Filipe, L., T. G. Santos, S. Valtchev, J. Pamies Teixeira, and R. M. Miranda,
"New method employing the electrical impedance for monitoring mechanical damage evolution in glass-reinforced: Applications to riveted joints",
Materials and Design, vol. 42, pp. 25-31, 2012.
Abstractn/a
Pereira, P., S. Valtchev, J. Pina, A. Gonçalves, V. M. Neves, and A. L. Rodrigues,
"Power electronics performance in cryogenic environment: evaluation for use in HTS power devices",
Journal of Physics: Conference Series, vol. 97: iopscience, pp. 012219, 2008.
AbstractPower electronics (PE) plays a major role in electrical devices and systems, namely in electromechanical drives, in motor and generator controllers, and in power grids, including high-voltage DC (HVDC) power transmission. PE is also used in devices for the protection against grid disturbances, like voltage sags or power breakdowns. To cope with these disturbances, back-up energy storage devices are used, like uninterruptible power supplies (UPS) and flywheels. Some of these devices may use superconductivity. Commercial PE semiconductor devices (power diodes, power MOSFETs, IGBTs, power Darlington transistors and others) are rarely (or never) experimented for cryogenic temperatures, even when designed for military applications. This means that its integration with HTS power devices is usually done in the hot environment, raising several implementation restrictions. These reasons led to the natural desire of characterising PE under extreme conditions, e. g. at liquid nitrogen temperatures, for use in HTS devices. Some researchers expect that cryogenic temperatures may increase power electronics' performance when compared with room-temperature operation, namely reducing conduction losses and switching time. Also the overall system efficiency may increase due to improved properties of semiconductor materials at low temperatures, reduced losses, and removal of dissipation elements. In this work, steady state operation of commercial PE semiconductors and devices were investigated at liquid nitrogen and room temperatures. Performances in cryogenic and room temperatures are compared. Results help to decide which environment is to be used for different power HTS applications.
Pina, J., P. Pereira, S. Valtchev, A. Gonçalves, V. M. Neves, A. Alvarez, and L. Rodrigues,
"A test rig for thrust force measurements of an all HTS linear synchronous motor",
Journal of Physics: Conference Series, vol. 97: IOPScience, pp. 012220, 2008.
AbstractThis paper presents the design of a test rig for an all HTS linear synchronous motor. Although this motor showed to have several unattractive characteristics, its design raised a number of problems which must be considered in future HTS machines design. HTS electromagnetic properties led to the development of new paradigms in electrical machines and power systems, as e. g. in some cases iron removal and consequent assembly of lighter devices. This is due to superconductor's ability to carry high currents with minimum losses and consequent generation in the surrounding air of flux densities much higher than the allowed by ferromagnetic saturation. However, severe restrictions in HTS power devices design that goes further beyond cryogenic considerations must be accounted in. This is usually the case when BSCCO tapes are used as conductors. Its bending limitations and the presence of flux components perpendicular to tape surface, due to the absence of iron, have to be considered for it may turn some possible applications not so attractive or even practically unfeasible. An all HTS linear synchronous motor built by BSCCO tapes as armature conductors and two trapped-flux YBCO bulks in the mover was constructed and thrust force measurements are starting to be performed. Although the device presents severe restrictions due to the exposed and other reasons, it allowed systematising its design. A pulsed-field magnetiser to generate opposite fluxes for both YBCO bulks is also detailed. Thrust force numerical predictions were already derived and presented.