Filipe Amarante dos Santos

The present paper presents a physical prototype that simulates the response of a single degree of freedom dynamic system, equipped with a novel semi-active vibration control device. This device comprises two superelastic NiTi elements working in phase opposition and aims to prevent deck unseating in simply supported bridges, during a seismic excitation. The special design of this device allows to avoid problems related to stress–relaxation phenomena and material degradation because of cyclic loading that have been observed in similar passive dissipation devices. The proposed design uses a strategy that permits the continuous adapting of the accumulated stress in the NiTi wires, on the basis of the response of the device to external excitations. Although unloaded, the NiTi elements remain strain/stress free, preventing stress–relaxation phenomena. With the occurrence of a dynamic excitation, a cumulative strain/stress process in the superelastic wires is initiated, enabling higher martensite transformation ratios and therefore increasing the damping capacities of the system while keeping the stresses in the wires inside a narrower superelastic window. The strain/stress accumulation in the superelastic wires is a direct result of the motion of the structure itself, with no need for external energy input.

This paper analyses and compares the dynamic behavior of superelastic shape memory alloy (SMA) systems based on two different constitutive models. The first model, although being able to describe the response of the material to complex uniaxial loading histories, is temperature and rate independent. The second model couples the mechanical and kinetic laws of the material with a balance equation considering the thermal effects. After numerical validation and calibration, the behavior of these two models is tested in single degree of freedom dynamic systems, with SMAs acting as restoring elements. Different dynamic loads are considered, including artificially generated seismic actions, in a numerical model of a railway viaduct. Finally, it is shown that, in spite of its simplicity, the temperature- and rate-independent model produces a set of very satisfying results. This, together with its robustness and straightforward computational implementation, yields a very appealing numerical tool to simulate superelastic passive control applications.